- Home > Supply Leads > Pin torque tester the F37.16 plug torque testing device
- Product Categories
- 1 @. Burning like fire-reta..
- 2 @. Electrical protection ..
- 3 @. Electrical Safety Test..
- 4 #. Electromagnetic Compat..
- 5 # German PTL Testing Mach..
- 6 ¥. Wire and cable testin..
- 7 &. Sensor Series
- 8 *. Torque Tester
- 9 (. LED light color electr..
- 10! . Head gauge series
- 11 # Electronic measuring i..
- 13 gauge *. Lamp holder
- 14.VDE gage
- ※ ※ needle sales testing ..
- 58: Needle flame tester
- 72: Glow-wire test apparatus
- 89: standard test instrument
- 77: Spring impactor
- 85: Tracking Tester
- Ball Pressure Test
- Japan NMB sensor
- U.S. AST Pressure Sensors
- Load cell
- Pressure sensor
- Canada GM88 display instrum..
- 68: horizontal and vertical..
- Crystal tester / crystal te..
- Test Probe
- The thermocouple temperatur..
- Creepage distance test card
- Plug torque tester
- Thermocouple
- Spray Nozzle
- Stability test rig
- Anti-strength tester
- Pin torque tester the F37.16 plug torque testing device
-
Plug torque test device
Pin torque test instrument F37.16
Line with IEC60335-1, the GB4706.1 of 22.3 test requirements. By the measured apparatus pin inserted into a normal use without earthing contact socket to determine their eligibility. 8mm socket mating surface and in contact with the casing where the plane of a horizontal pivot. Accuracy of at least 0.1mm displacement sensor A to determine this distance. The mating surface is maintained in the vertical plane, the test here torque, the test range of 0-1Nm, accuracy of at least 0.01Nm. (Keep the socket in the vertical plane of the torque is not included in the test value) applied to each pin in the pin longitudinal line direction 50N pull 1min. Through the displacement of the displacement sensor A test pins. 0.4Nm torque applied in each direction of each pin and set up test time, showing the actual applied torque value, the precision of at least 0.01Nm.
PTL is the Socket-Outlet, the Torque Balance
for measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets
according to IEC 60065 :2005-12 § 15.4.1Fig. 11,
IEC 60335-1 :2006-09 § 22.3,
IEC 60884-1 :2006-07 § 14.23.2,
IEC 60950-1 :2005-12 § 4.3.6,
VDE 0620-1 :2005-04 § 14.23.2.
Standard Outfit:
1 Bitmap testing socket-outlet replica "Euro", two-pole, according to CEE 7, without earth contacts and without protecting rim,
The testing distribution the socket-outlet replica "Schuko", according to the CEE 7 standard sheet III.
1 frame for the socket-outlet, pivoted around a horizontal axis through the centre lines of the contact tubes, pivot8 mmbehind the engagement face of the socket-outlet,
1 balance beam, with scale 0 to0.30 m, rigidly connected with the frame for the socket-outlet,
1 sliding weight, 1 N, lockable, for torques from 0 Nm to 0.30 Nm,
1 counterweight, with screw for fine adjustment, for adjusting the balance beam
1 the stop for the balance beam, adjustable, and the arrest able
1 trestle with 2 ball bearings and with crossbeam, mounted on a base plate, base plate with adjustable feet and box spirit level.